Hedge Trimmer Gas Powered Chain Saw With Compact Structure 0.65kw/8000rpm
Gas Powered Chain Saw Specification:
Air Cooling Single Cylinder,2 Stroke
Fuel Tank Capacity
Rated Power Output
Easy Starter System
1.Hedge Trimmer Spare Parts Testing: We will test the spare parts quality before assembling. It includes the appearance, main spare parts performance.
2.Sample Testing: After the spare parts test, we will assemble 1-2 samples, to make the test before mass assembling. The testing includes the endurance test, to see if the machine conformed to the endurance standard.
3.Hedge Trimmer Inspection: Our quality inspector will inspect the semi-finished product during the production.
4.Adjusting: After assembling, we will adjust the carburetor for each machine.
5.Hedge Trimmer Final Testing: re-test as step 2.
1. Powerful engine, environment friendly and energy saving.
2. Compact structure, light weight.
3. Collecting of cut branches and leaves.
inspection for hedge trimmer:
1.Fuel surface from the external fuel tank to check fuel surface, with low fuel, plus fuel to the limit. The use of unleaded petrol and fuel two-stroke oil mixture of
2.25:1 to 40:1 ratio preparation, can not use pure gasoline and gasoline containing impurities;
3.Check the hedge trimmer air filter, the dirt and found that dirt should be cleaned;
4.Throttle cable throttle cable inspection in the end of the free space, check the smooth operation of the oil door handles;
5.Blade installed to check whether the loose nuts, such as a need to tighten the nut; to check whether there is any blade cracks, gaps, bending and wear, if necessary, should be promptly replaced;
6.Hedge trimmer blade checks whether the loosening, if necessary, the security guard bolt tightening; to check whether the damage shields, such as the need to replace the example;
7.Rapid release of equipment pull up bar and check the release is linked to the release, will be linked to place.
1. Do you provide sample?
Yes, But samples fee and freight fee will charge firstly ,
and deduct the sample fee after you place the mass order.
2.what‘ s the Warranty for your products?
all our provide 1 year warranty.
free spare parts will provided when next order if any problems caused by non human -factors
3. what's your MOQ?
different products different MOQ, usual chain saw and brush cutter 's MOQ is 200pcs.
4. what's your delivery time?
15-30days after order confirmation and advance payment
5. How about the packing?
Packing will do as customer 's requirement if order quantity achieved to 500pcs
use factory normal packing if the order quantity less than 500pcs.
6.what certification do you have ?
for European customer , we have CE,GS ,ERUO0-II certification.